MS27391F
REQUIREMENTS
Nipple tube to hose dimensions and configuration, see figure 1.
This part is a integral part of MS27386. The item is only procured as an integral part of adapter assemblies.
Materials: Materials and material code see table I.
TABLE I. Materials and PIN codes.
Material code |
Material |
Requirement |
Blank |
Gombination of aluminum alloy and corrosion-resistant steel (GRES) |
See below |
G |
GRES |
Glass 304, condition A, in accordance with ASTM A276 or 304 in accordance with SAE-AMS5639 |
D |
Aluminum alloy |
6061-T651, in accordance with SAE-AMS4117 |
Finish:
GRES: Passivate in accordance with SAE-AMS2700, method 1, type 6 or 7. Aluminum alloy: Anodize in accordance with MIL-A-8625, type II, dye yellow.
Lubrication:
NOTE: Avoid using graphite dry-film lubes with aluminum nipples because in a wet environment, graphite becomes corrosive to the aluminum.
Dry film lubricant. Dry-film lubricate GRES nipples in accordance with figure 2 and table II.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business