MS27389D
PIN: The PIN consists of prefix "MS", the specification sheet number, ,dash, number for 45° elbow subassembly size, , letter for material, , blank or L for lockwire holes, and blank or number for dry film lubricant. Unassigned PIN's shall not be used.
MS 27389 -8 C L 4
PIN examples:
Dry film class designator (see table III) Blank or "L" for lockwire holes
Material code letter (see table I)
Size code number (see table II) Specification sheet number
MS prefix
MS27389-8 |
indicates a 45° elbow subassembly size 8, a combination of aluminum and CRES, and with dry film class designator "blank". |
MS27389-8CL |
indicates a 45° elbow subassembly size 8, CRES with lockwire holes, and dry film class designator "blank". |
MS27389-8C4 |
indicates a 45° elbow subassembly size 8, CRES with dry film class designator 4. |
Identification of product. The Part or Identifying Number (PIN) and the manufacturer's CAGE code or trademark shall be permanently marked on the assembly.
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-27272, this document references the following:
MIL-A-8625
MIL-PRF-46010
MS27071
MS27072
MS27384
MS27395
SAE-AS1043
SAE-AS1701
SAE-AS5272
SAE-AS33514
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business