MS27381C
REQUIREMENTS
Adapter assembly illustration, see figure 1
Intended use. This adapter is intended for use with hose conforming to MIL-DTL-27267.
Flareless fitting, hose connector design. Use MIL-DTL-25579/1 for application of NAS1760 design. Materials. Material and material codes see table I. See applicable specification sheet and MIL-DTL-27272
for material of other components identified in table II for their material requirements.
TABLE I. Materials and PIN codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
TABLE II. Adapter assembly composition. 1/ 2/
Size and material code |
Nipple subassembly size and material code |
Sleeve size and material code |
Socket size and material code |
A max inch (mm) |
MS27386 3/ |
MS27070 3/ |
MS27069 3/ |
||
-3/-4C 4/ |
-3/-4C |
-4C |
-4C |
1.55 (39.4) |
-4C |
-4C |
1.50 (38.1) |
||
-5C |
-5C |
-5C |
-5C |
1.57 (39.9) |
-6C |
-6C |
-6C |
-6C |
1.68 (42.7) |
-8C |
-8C |
-8C |
-8C |
1.92 (48.8) |
-8 |
-8 |
|||
-10C |
-10C |
-10C |
-10C |
2.14 (54.4) |
-10 |
-10 |
|||
-12C |
-12C |
-12C |
-12C |
2.21 (56.1) |
-12 |
-12 |
|||
-16C |
-16C |
-16C |
-16C |
2.42 (61.5) |
-16 |
-16 |
|||
-20C |
-20C |
-20C |
-20C |
2.79 (70.9) |
-20 |
-20 |
|||
-24C |
-24C |
-24C |
-24C |
3.11 (79.0) |
-24 |
-24 |
1/ Dimensions are in inches.
2/ Metric equivalent's are given for information only.
3/ MS27069, MS27070 and MS27386 shall be dry film lubricated in accordance with table III, dry film is applied in accordance with MS27069, MS27070 or MS27386 as applicable.
4/ Swivel nut and sealing surface of this nipple subassembly shall mate with
SAE-AS33514-3 fitting. The remaining portion of the subassembly shall mate with
M27267-4 hose.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business