MS27234C
REQUIREMENTS
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS27223 and MS27227. As part of an assembly this part is used on MS27224 and MS27228 hose to tube adapters. This item shall not be procured for stocking purposes.
Materials: Materials shall be in accordance with MIL-DTL-5070.
Finish: Finish shall be in accordance with MIL-DTL-5070. Platings are applied after heat treats. Color identification: Color identification shall be in accordance with MIL-DTL-5070.
Part or Identifying Number (PIN) example:
MS 27234 -4 CZ
Material/finish code, see table I Dash number on figure 1
Specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
CC |
-4 through -6 |
Carbon Steel - cadmium plating |
CZ |
-4 through -6 |
Carbon steel - zinc plating |
SS |
-4 through -6 |
Corrosion resistant steel - N/A |
AA |
-8 through -48 |
Aluminum - anodic coating |
TA |
-4 through -48 |
Titanium - anodized or fluoride phosphated. |
Identification of product. The PIN and the manufacturer's Commercial and Government Entity (CAGE) code or trademark shall be permanently marked on the assembly, see figure 1, or on a removable tag securely attached to the assembly.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-5070, this document references the following: MS27223
MS27224
MS27227
MS27228
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business