MS27234C
|
Dash number |
A ±.015 (0.38 inches (mm) |
B +.031 (0.20) -.000 inches (mm) |
C Dia (see note 4 ±.005 (0.13) inches (mm) |
D Rad ±.060 (1.52) inches (mm) |
T tube wall thickness inches (mm) |
x (see note 5) inches (mm) |
-4 |
.531 (13.49) |
.156 (3.96) |
.245 (6.22) |
.375 (9.53) |
.035 (.89) |
.010 (.25) |
-5 |
.594 (15.09) |
.307 (7.80) |
.438 (11.13) |
.049 (1.24) |
.012 (.30) |
|
-6 |
.656 (16.66) |
.370 (9.40) |
.500 (12.70) |
.014 (.36) |
||
-8 |
.495 (12.57) |
.065 (1.65) |
.016 (.41) |
|||
-10 |
.781 (19.84) |
.620 (15.75) |
.625 (15.88) |
.018 (.46) |
||
-12 |
1.094 (27.79) |
.250 (6.35) |
.745 (18.92) |
.844 (21.44) |
.020 (.51) |
|
-16 |
1.219 (30.96) |
.995 (25.27) |
.969 (24.61) |
.022 (.56) |
||
-20 |
1.438 (36.53) |
1.245 (31.62) |
1.188 (30.18) |
.024 (.61) |
||
-24 |
1.625 (41.28) |
1.495 (37.97) |
1.375 (34.93) |
.083 (2.11) |
.026 (.66) |
|
-32 |
2.000 (50.80) |
1.995 (50.67) |
1.750 (44.45) |
.028 (.71) |
||
-40 |
2.312 (58.72) |
2.370 (60.20) |
2.062 (52.37) |
.095 (2.41) |
.030 (.76) |
|
-48 |
2.562 (65.07) |
2.995 (76.07) |
2.312 (58.72) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, break all corners, radius .010/.005 inch (.25/.01 mm).
4. Ovality at bend shall not exceed 5% of tubing outside diameter.
5. Face of tube must be perpendicular to centerline of the tube within x total indicator reading.
6. Break all sharp edges and remove all burrs and slivers.
FIGURE 1. Elbow dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business