MS27231B
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use: This part is a component of MS27232. Material: Aluminum shall be accordance with MIL-DTL-5070. Finish. Finish shall be accordance with MIL-DTL-5070.
Color identification: Color identification shall be in accordance with MIL-DTL-5070.
PIN example:
MS 27231 -3 AA
Material/finish code, see table I Dash number on figure 1
Specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
AA |
-8 through-48 |
Aluminum - anodic coating |
Identification of product. The PIN and the manufacturer's Commercial and Government Entity (CAGE) Code or trademark shall be permanently marked on the nipple, see figure 1, or on a removable tag securely attached to the nipple.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-5070, this document references the following:
MS27232
MS27237
MS27239
ASME B46.1
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business