MS27082E
PIN: The PIN consists of prefix "MS", the specification sheet number, dash number for 90° elbow size, letter for material, and a blank or number for dry film lubricant. Unassigned PIN's shall not be used.
MS 27082 -10 C 4
Dry film class designator (see table II)
Material code letter (see table I) Size code number (see figure 1)
Specification sheet number
PIN examples:
MS prefix
MS27082-10D |
indicates a 90° elbow size 10, aluminum and dry film class designator "blank".. |
MS27082-10C |
indicates a 90° elbow size 10, CRES and dry film class designator "blank". |
MS27082-10C4 |
indicates a 90° elbow size 10, CRES with dry film class designator 4. |
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-27272, this document references the following:
MIL-PRF-46010
MIL-A-8625
MS27066
ASME 846.1
SAE-AMS-QQ-A-367
SAE-AMS-QQ-S-763
SAE-AMS-QQ-A-225/9
SAE-AMS2700
SAE-AMS4117
SAE-AMS4124
SAE-AMS5639
SAE-AMS5645
SAE-AS1701
SAE-AS5272
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business