MS27082E
REQUIREMENTS
Elbow illustration. See figure 1.
Intended use. This part is a component of MS27066. This is a design standard for manufacturing purposes. The item is only procured as an integral part of adapter assemblies.
Materials. Material and material codes see table I.
TABLE I. Materials and material codes.
Material code |
Material |
C |
Corrosion-resistant steel (CRES), class 304 or 321 cold drawn or cold rolled in accordance with SAE-AMS-QQ-S-763, SAE-AMS5639, or SAE-AMS5645. |
D |
Aluminum alloy, 6061-T6 or T651 in accordance with SAE-AMS-QQ-A-367, SAE-AMS4117 or alloy 7075-T73, 7075-T7351 in accordance with SAE-AMS-QQ-A-225/9 or alloy 7055- T7351 in accordance with SAE-AMS4124. |
Finish. Corrosion-resistant steel, passivate in accordance with SAE-AMS-2700, method 1, type 6 or
7. Dry-film lubricate area X, see figure 2 and table II.
Aluminum alloy. Anodize in accordance with MIL-A-8625, type II, dye blue.
NOTE: Avoid using graphite dry film lubes with aluminum nipples because in a wet environment, graphite becomes corrosive to the aluminum.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business