MS27072F
Part or Identifying Number (PIN): The PIN consists of prefix "MS", the specification sheet number, dash number for wire size, letter for material, and a blank or number for dry film lubricant. Unassigned PIN's shall not be used.
MS 27072 -8 C 4
PIN examples:
Dry film designator (see table I) Material code letter "C" CRES Size code number (see figure 1) Specification sheet number
MS prefix
MS27072-8C |
indicates a wire size 8, CRES with dry film class designator "blank". |
MS27072-8C4 |
indicates a wire size 8, CRES with dry film class designator 4. |
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-27272, this document references the following:
MIL-PRF-46010
MS27062
MS27063
MS27064
MS27065
MS27066
MS27067
MS27068
MS27387
MS27388
MS27389
MS27390
ASME 846.1
ASTM A313/A313M ASTM A580/A580M SAE-AMS2700
SAE-AS1701
SAE-AS5272
SAE-AS5685
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business