MS27072F
Size and material code |
A (see note 1) + .015 |
B |
C +.013 -.010 |
D +.005 -.025 |
E rad. (see note 2) +.010 - .005 |
F rad. |
||
-4C |
1.203 |
.072 |
+.000 - .005 |
.017 |
.065 |
.139 |
.026 |
+ .005 |
-5C |
1.325 |
.080 |
+.000 -.004 |
.020 |
.073 |
.156 |
.030 |
|
-6C |
1.545 |
|||||||
-8C |
1.969 |
.095 |
.023 |
.087 |
.186 |
.037 |
+ .010 |
|
-10C |
2.250 |
|||||||
-12C |
2.625 |
.125 |
.031 |
.115 |
.246 |
.050 |
||
-16C |
3.703 |
|||||||
-20C |
4.500 |
|||||||
-24C |
5.375 |
|||||||
NOTES:
1. Wire shall be straight within .020 full indicator movement.
2. Radius shall be concentric to wire OD within .005 full indicator movement.
3. Unless otherwise specified, break or radius all corners .005, +.005, -.000.
4. Unless otherwise specified, maximum surface roughness shall not exceed 125 ยตin. Ra in accordance with ASME B46.1.
5. Remove all burrs and slivers.
FIGURE 1. Wire, retainer illustration - Continued.
REQUIREMENTS
Intended use. This part is a component of MS27062 through MS27068 and MS27387 through MS27390. This is a design standard for manufacturing purposes. The item is only procured as an integral part of adapter assemblies.
Wire, retainer dimensions and configuration, see figure 1.
Material. Corrosion-resistant steel, class 305 or 304, condition A in accordance with
ASTM A580/A580M or ASTM A313/A313M, or 305 in accordance with SAE-AS5685.
Finish. Passivate in accordance with SAE-AMS2700, method 1, type 6 or 7. Dry-film lubricant, see table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business