MS27068D
PIN: The PIN consists of prefix "MS" the specification sheet number, dash number for 90° elbow subassembly size, letter for material, blank or L for lockwire holes, and a blank or number for dry film lubricant. Unassigned PIN's shall not be used.
MS 27068 -8 C L 4
Dry film designator (see table III)
Blank or "L" for lockwire holes Material code letter (see table I) Size code number (see table II)
Specification sheet number
PIN examples:
MS prefix
MS27068-8C |
indicates a 90° elbow subassembly size 8, CRES with dry film class designator "blank". |
MS27068-8C4 |
indicates a 90° elbow subassembly size 8, CRES with dry film class designator 4. |
MS27068-8L |
indicates a 90° elbow subassembly size 8, a combination of aluminum and CRES, with lockwire holes, and with dry film class designator "blank". |
Identification of product. The PIN and the manufacturer's trademark shall be permanently marked on the assembly.
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-27272, this document references the following:
MIL-A-8625
MIL-PRF-46010
MS27060
MS27071
MS27072
MS27086
SAE-AS1043
SAE-AS4395
SAE-AS5272
SAE-AS1701
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business