MS27063F
REQUIREMENTS
Elbow subassembly illustration. See figure 1. Intended use. This part is a component of MS27055.
Materials. Material and material codes see table I. See applicable specification sheet and
MIL-0TL-27272 for material of other components identified in table II for their material requirements.
TABLE I. Materials and material codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
TABLE II. Adapter assembly composition. 1/ 2/
Size and material code |
Wire size and material code |
Union, nipple size and material code |
Elbow, nipple end size and material code |
A 5/ ±.035 inch (mm) |
B 5/ ±.035 inch (mm) |
MS27063 |
MS27072 3/ |
MS27071 3/ 4/ |
MS27087 3/ 4/ |
||
-10C |
-10C |
-10C |
-10C |
1.486 (37.74) |
.536 (13.61) |
-10 |
-100 |
-100 |
|||
-12C |
-12C |
-12C |
-12C |
1.937 (49.20) |
.623 (15.82) |
-12 |
-120 |
-120 |
|||
-16C |
-16C |
-16C |
-16C |
1.993 (50.62) |
.660 (16.76) |
-16 |
-160 |
-160 |
|||
-20C |
-20C |
-20C |
-20C |
2.252 (57.20) |
.768 (19.51) |
-20 |
-200 |
-200 |
|||
-24C |
-24C |
-24C |
-24C |
2.561 (65.05) |
.867 (22.02) |
-24 |
-240 |
-240 |
1/ 0imensions are in inches.
2/ Metric equivalents are given for general information only.
3/ MS27071, MS27072, and MS27087 shall be dry film lubricated in accordance with table III, dry film is applied in accordance with MS27071, MS27072, or MS27087 as applicable.
4/ Material code "0" aluminum alloy.
5/ See figure 1.
The inside diameter (I0) of the elbow shall not be less than the I0 of the nipple. Ovality shall not exceed 7.5 percent of the nominal tubing outside diameter. The minimum wall thickness at the elbow bend shall not be less than .034 inch (0.86 mm) for sizes -10 through -20, and .044 inch (1.12 mm)
for size -24.
If required, lockwire holes to be drilled in accordance with SAE-AS1043 and suffix L added to the Part or Identifying Number (PIN).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business