MS27055E
REQUIREMENTS:
Adapter assembly illustration. See figure 1.
Intended use. This adapter is intended for use with hose conforming to MIL-DTL-27267. Materials. Material and material codes see table I. See applicable specification sheet and
MIL-DTL-27272 for material of other components identified in table II for their material requirements.
TABLE I. Materials and material codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
TABLE II. Adapter assembly composition. 1/ 2/
Size and material code |
Elbow subassembly size and material code |
Sleeve size and material code |
Socket size and material code |
A max 4/ inch (mm) |
MS27055 |
MS27063 3/ |
MS27070 3/ |
MS27069 3/ |
|
-10C |
-10C |
-10C |
-10C |
2.43 (61.7) |
-10 |
-10 |
|||
-12C |
-12C |
-12C |
-12C |
2.89 (73.4) |
-12 |
-12 |
|||
-16C |
-16C |
-16C |
-16C |
3.02 (76.7) |
-16 |
-16 |
|||
-20C |
-20C |
-20C |
-20C |
3.52 (89.4) |
-20 |
-20 |
|||
-24C |
-24C |
-24C |
-24C |
3.80 (96.5) |
-24 |
-24 |
1/ Dimensions are in inches.
2/ Metric equivalents are given for general information only.
3/ MS27063, MS27069 and MS27070 shall be dry film lubricated in accordance with table III, dry film is applied in accordance with MS27063, MS27069 or MS27070 as applicable.
4/ See figure 1.
If required, lockwire holes to be drilled in accordance with SAE-AS1043 and suffix L added to the Part or Identifying Number (PIN).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business