MS27054E
REQUIREMENTS:
Adapter assembly illustration. See figure 1.
Intended use. This adapter is intended for use with hose conforming to MIL-DTL-27267. Materials. Material and material codes see table I. See applicable specification sheet and
MIL-DTL-27272 for material of other components identified in table II for their material requirements.
TABLE I. Materials and material codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
TABLE II. Adapter assembly composition. 1/ 2/
Size and material code |
Nipple subassembly size and material code |
Sleeve size and material code |
Socket size and material code |
A 4/ max inch (mm) |
MS27062 3/ |
MS27070 3/ |
MS27069 3/ |
||
-BC |
-BC |
-BC |
-BC |
2.04 (51.B) |
-B |
-B |
|||
-10C |
-10C |
-10C |
-10C |
2.17 (55.1) |
-10 |
-10 |
|||
-12C |
-12C |
-12C |
-12C |
2.36 (59.9) |
-12 |
-12 |
|||
-16C |
-16C |
-16C |
-16C |
2.46 (62.5) |
-16 |
-16 |
|||
-20C |
-20C |
-20C |
-20C |
2.77 (70.4) |
-20 |
-20 |
|||
-24C |
-24C |
-24C |
-24C |
2.B7 (72.9) |
-24 |
-24 |
1/ Dimensions are in inches.
2/ Metric equivalents are given for general information only.
3/ MS27062, MS27069 and MS27070 shall be dry film lubricated in accordance with table III, dry film is applied in accordance with MS27062, MS27069 or MS27070 as applicable.
4/ See figure 1.
MS27062, MS27069 and MS27070 parts shall be coated with the same type of dry film lubricant as indicated in the Part or Identifying Number (PIN), no mixing of dry film lubricants shall be used on an assembly unless it is of the types specified by the "blank" designator.
NOTE: Avoid using graphite dry film lubes with aluminum nipples because in a wet environment, graphite becomes corrosive to the aluminum.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business