MS27053E
REQUIREMENTS:
Intended use. This adapter is intended for use only with hose in accordance with MIL-DTL-27267. Materials. Material and material codes see table I. See applicable specification sheet and
MIL-DTL-27272 for material of other components identified in table II for their material requirements.
TABLE I. Materials and material codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
TABLE II. Adapter assembly composition. 1/ 2/
|
Size and material code |
Nipple subassembly size and material code |
Sleeve size and material code |
Socket size and material code |
A max inch (mm) |
MS27061 3/ |
MS27070 3/ |
MS27069 3/ |
||
-3/-4C 4/ |
-3/4C |
-4C |
-4C |
1.33 (33.78) |
-4C |
-4C |
1.35 (34.29) |
||
-5C |
-5C |
-5C |
-5C |
1.41 (35.81) |
-6C |
-6C |
-6C |
-6C |
1.47 (37.34) |
-8C |
-8C |
-8C |
-8C |
1.70 (43.18) |
-8 |
-8 |
|||
-10C |
-10C |
-10C |
-10C |
1.86 (47.24) |
-10 |
-10 |
|||
-12C |
-12C |
-12C |
-12C |
1.93 (49.02) |
-12 |
-12 |
|||
-16C |
-16C |
-16C |
-16C |
2.15 (54.61) |
-16 |
-16 |
|||
-20C |
-20C |
-20C |
-20C |
2.52 (64.01) |
-20 |
-20 |
|||
-24C |
-24C |
-24C |
-24C |
2.71 (68.83) |
-24 |
-24 |
1/ Dimensions are in inches.
2/ Metric equivalents are given for general information only.
3/ MS27061, MS27069 and MS27070 shall be dry film lubricated in accordance with table III, dry film is applied in accordance with MS27061, MS27069 and MS27070 as applicable.
4/ Swivel nut and sealing surface of this nipple subassembly shall mate with SAE-AS4395-3 fitting. The remaining portion of the subassembly is to mate with M27267-4 hose.
If required, lockwire holes to be drilled in accordance with SAE-AS1043 and suffix L added to Part or
Identifying Number (PIN).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business