MS24589C
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS24587.
Material: Aluminum shall be in accordance with MIL-DTL-5070. Finish. Finish shall be in accordance with MIL-DTL-5070.
Color identification: Color identification shall be accordance with MIL-DTL-5070.
Part or Identifying Number (PIN) example:
MS 24589 -16 AA
PIN example:
Material/finish code, see table I Dash number on figure 1
Specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
AA |
-16 through -32 |
Aluminum - anodic coating |
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents: In addition to MIL-DTL-5070, this document references the following: ASME B46.1
MIL-S-7742
MS24587
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business