MS24589C
Dash number |
A inches (mm) |
B inches (mm) |
C inches (mm) |
D inches (mm) |
E inches (mm) |
F inches (mm) |
G inches (mm) |
H inches (mm) |
J inches (mm) |
-16 |
2.146 (54.51) 2.126 (54.00) |
1.224 (31.09) 1.218 (30.94) |
1.061 (26.95) 1.052 (26.72) |
.900 (22.86) .890 (22.61) |
.990 (25.15) .980 (24.89) |
.363 (9.22) .358 (9.09) |
.692 (17.58) |
1.118 (28.40) 1.088 (27.64) |
.200 (5.08) |
-20 |
2.372 (60.25) 2.352 (59.74) |
1.536 (39.01) 1.530 (38.86) |
1.311 (33.30) 1.302 (33.07) |
1.125 (28.58) 1.115 (28.32) |
1.235 (31.37) 1.225 (31.12) |
.380 (9.65) .370 (9.40) |
.746 (18.95) |
1.425 (36.20) 1.395 (35.43) |
.200 (5.08) |
-24 |
2.503 (63.58) 2.483 (63.07) |
1.786 (45.36) 1.781 (45.24) |
1.561 (39.65) 1.552 (39.42) |
1.360 (34.54) 1.350 (34.29) |
1.500 (38.10) 1.480 (37.59) |
.436 (11.07) .426 (10.82) |
.814 (20.68) |
1.640 (41.66) 1.610 (40.89) |
.150 (3.81) |
-32 |
3.094 (78.59) 3.074 (78.08) |
2.410 (61.21) 2.405 (61.09) |
1.998 (50.75) 1.990 (50.55) |
1.830 (46.48) 1.820 (46.23) |
1.935 (49.15) 1.915 (48.64) |
.536 (13.61) .526 (13.36) |
.940 (23.88) |
2.255 (57.28) 2.225 (56.52) |
.200 (5.08) |
Dash number |
K ±.25° |
L inches (mm) |
M |
PD |
-16 |
5° |
.815 (20.70) |
1.062-18 UNEF-2A |
--- |
-20 |
5° |
1.047 (26.59) |
1.312-18 UNEF-2A |
--- |
-24 |
5° |
1.281 (32.54) |
1.562-18 UNEF-2A |
--- |
-32 |
4° |
1.750 (44.45) |
2.000-18 UNS-2A (see note 7) |
1.9624 1.9573 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are as follows: angles ±.5°; decimals ±.005 (0.13 mm).
4. Unless otherwise specified, maximum surface roughness shall be 125 µin Ra in accordance with
ASME B46.1
5. Threads shall be in accordance with MIL-S-7742.
6. Break all sharp edges and remove all hanging burrs and slivers.
7. Pitch diameter.
8. Part or Identifying Number (PIN).
FIGURE 1. Nipple dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business