MS24588C
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use: This part is a component of MS24587.
Materials: Materials shall be in accordance with MIL-DTL-5070. Finish: Finish shall be in accordance with MIL-DTL-5070.
Color identification: Color identification shall be accordance with MIL-DTL-5070.
PIN example:
MS 24588 -3 CC
Material/finish code, see table I Dash number on figure 1
Specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
CC |
-3 thru -6 |
Carbon Steel - cadmium plating |
CZ |
-3 thru -6 |
Carbon steel - zinc plating |
SS |
-3 through -6 |
Corrosion resistant steel - N/A |
AA |
-8 through -12 |
Aluminum - anodic coating |
TA |
-3 through -12 |
Titanium - Anodized or fluoride phosphated. |
To the users of this document, it is recommended that the use of carbon steel material with cadmium plating be used only when the other materials and finishes specified in this document cannot meet performance requirements.
Marking: The manufacturer's Commercial and Government Entity (CAGE) Code or trademark shall be permanently marked on the nipple, see figure 1, or on a removable tag securely attached to the nipple.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-5070, this document references the following: MIL-S-7742
MS24587
ASME B46.1
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business