MS21955C
Low flow size |
Tube OD inches (mm) |
Thread T SAE-AS8879 |
B inches (mm) |
C inches (mm) |
D dia inches (mm) |
E inches (mm) |
W3L |
.187 (4.75) |
.375-24UNJF-3A |
.500 (12.70) |
.540 (13.72) |
.710 (18.03) |
1.109 (28.17) |
W4L |
.250 (6.35) |
.4375-20UNJF-3A |
.500 (12.70) |
.625 (15.88) |
.710 (18.03) |
1.187 (30.15) |
W5L |
.312 (7.92) |
.500-20UNJF-3A |
.500 (12.70) |
.625 (15.88) |
.710 (18.03) |
1.187 (30.15) |
W6L |
.375 (9.53) |
.5625-18UNJF-3A |
.500 (12.70) |
.640 (16.26) |
.710 (18.03) |
1.203 (30.56) |
High flow size |
Tube OD inches (mm) |
Thread T SAE-AS8879 |
B inches (mm) |
C inches (mm) |
D dia inches (mm) |
E inches (mm) |
W4H |
.250 (6.35) |
.4375-20UNJF-3A |
.594 (15.09) |
.625 (15.88) |
.710 (18.03) |
1.438 (36.53) |
W5H |
.312 (7.92) |
.500-20UNJF-3A |
.594 (15.09) |
.625 (15.88) |
.710 (18.03) |
1.438 (36.53) |
W6H |
.375 (9.53) |
.5625-18UNJF-3A |
.594 (15.09) |
.648 (16.46) |
.710 (18.03) |
1.460 (37.08) |
W8H |
.500 (12.70) |
.750-16UNJF-3A |
.594 (15.09) |
.750 (19.05) |
.750 (19.05) |
1.562 (39.67) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Dimensioning and tolerancing in accordance with ASME Y14.5M.
4. All machined surfaces shall be finished to 250 µin (6.35µm) Ra, unless otherwise specified.
Surface finish shall be in accordance with ASME B46.1.
5. Fittings shall be free of all burrs and slivers.
6. Unless otherwise specified tolerances for three point decimals ±.010 inch (0.25 mm).
FIGURE 1. Body, cluster fitting - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business