MS20760D
The connector flange to hose shall not exceed the weight limits specified in table III.
TABLE III. Weight limits. 1/
Size code number |
Weight max lbs, (gr) |
||
AL alloy |
Steel/CRES |
TI alloy |
|
8 |
--- |
--- |
--- |
10 |
--- |
--- |
--- |
12 |
.09 (41) |
.25 (113) |
.15 (68) |
12-16 |
.10 (45) |
.28 (127) |
.17 (77) |
16 |
.12 (54) |
.35 (159) |
.20 (91) |
20 |
.16 (73) |
.53 (240) |
.26 (118) |
20-24 |
.23 (104) |
.64 (290) |
.38 (172) |
24 |
.25 (113) |
1.28 (581) |
.41 (186) |
32 |
.45 (204) |
1.82 (826) |
.74 (336) |
40 (a) |
.65 (295) |
2.32 (1052) |
1.07 (485) |
48 (a) |
.83 (376) |
2.43 (1102) |
1.37 (621) |
1/ Metric equivalents given for information only.
Part or Identifying Number (PIN): The PIN consists of prefix "MS" the specification sheet number, and a dash, a letter for material/finish and size code. Unassigned PIN's shall not be used.
MS 20760 - D 8
Size code number (see figure1)
Material/finish code letter (see table II)
Dash
Specification sheet number
MS prefix
PIN example: MS20760-D8 indicates a flange to hose adapter .500 inch (12.70 mm) flange to a .750 inch (19.05 mm) thread, aluminum alloy 2014-T4 anodized light blue.
Cadmium is not recommended. To the users of this document, it is recommended that the use of carbon steel material with cadmium plating be used only when other materials and finishes specified in this document cannot meet performance requirements.
Marking: Part shall be permanently marked with the MS PIN, and include the manufacturers CAGE, name, or trademark.
Referenced documents shall be of the issue in effect on date of invitation for bid.
Changes from previous issues. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business