MIL-DTL-8789F
NCSL INTERNATIONAL
NCSL Z540-1
-
Calibration Laboratories and Measuring and Test Equipment, General
Requirements
(Copies of this document are available online at https://www.ncsli.org or from NCSL International 2995
Wilderness Place, Suite 107 Boulder, Colorado 80301-5404)
SAE INTERNATIONAL
SAE-AMS-H-6088
-
Heat Treatment of Aluminum Alloys
SAE-AMS-H-6875
-
Heat Treatment of Steel Raw Materials
SAE-AMS-QQ-A-225/6 -
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold
Finished-UNS A92024
SAE-AMS-QQ-A-225/9
-
Aluminum Alloy 7075, Bar, Rod, and Wire, and Special Shapes;
Rolled, Drawn, or Cold Finished-UNS A97075
SAE-AMS-QQ-A-367
-
Aluminum Alloy Forgings
SAE-AMS-QQ-P-416
-
Plating, Cadmium (Electrodeposited)
SAE-AMS-S-6758
-
Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft
Quality)
SAE-AMS-2700
-
Passivation of Corrosion Resistant Steels
SAE-AMS-4111
-
Aluminum Alloy Forgings 7.7Zn-2.5Mg-1.5Cu-0.16Cr (7049-T73)
Solution and Precipitation Heat Treated (UNS A97049) R
SAE-AMS-4124
-
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn -
2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress
Relieved by Stretching, and Overaged-UNS A97075
SAE-AMS-4141
-
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-
T73) Solution and Precipitation Heat Treated
SAE-AMS-5050
-
Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed
SAE-AMS-5053
-
Steel Tubing, Welded 0.13 Carbon, Maximum Annealed
SAE-AMS-6322
-
Steel Bars, Forgings and Rings 0.50Cr-0.55Ni-0.25Mo (0.38-0.43C)
(SAE 8740)
SAE-AMS-6325
-
Steel, Bars and Forgings 0.50Cr-0.55Ni-0.25Mo (0.38-0.43C) (SAE
8740) Heat Treated, 105 psi (724MPa) Tensile Strength
SAE-AMS-6327
-
Steel Bars and Forgings 0.50Cr-0.55Ni-0.25Mo (0.38-0.43C) (SAE
8740) Heat Treated, 125,00 psi (862MPa) Tensile Strength
SAE-AMS-6349
-
Steel Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Normalized-
UNS G41400
SAE-AMS-6370
-
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE
4130)-UNS G41300
SAE-AMS-6382
-
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE
4140) Annealed-UNS G41400
SAE-ARP603
-
Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
SAE-ARP891
-
Determination of Aluminum Alloy Tempers through Electrical
Conductivity Measurement (Eddy Current)
SAE-ARP908
-
Torque Requirements Installation and Qualification Test, Hose and
Tube Fittings
SAE-AS4395
-
Fitting End-Flared Tube Connection, Design Standard
SAE-AS8879
-
Screw Threads - UNJ Profile, Inch
SAE-AS33514
-
Fitting End, Standard Dimensions for Flareless Tube Connection and
Gasket Seal
SAE-J1966
-
Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil)
Copies of these documents are available online at https://www.sae.org or from SAE World Headquarters,
400 Commonwealth Drive, Warrendale, PA 15096-0001.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business