MIL-DTL-52525/8C
To the users of this document, it is recommended that the use of carbon steel material with cadmium
plating be used only when the other materials and finishes specified in this document cannot meet
performance requirements.
Color identification. Color identification shall be in accordance with SAE-AS4841.
Marking shall include the manufacturer's name or trademark, size, and hose identifier R1. Location of
marking is optional.
Harmonization to SAE-J516 cross reference PIN in table IV is for reference only. SAE style fittings may
not have the same material/finish as required by MIL-DTL-52525 and legacy with
MIL-DTL-52471.
TABLE IV. Harmonization to SAE-J516 cross reference PIN. 1/
SAE PIN
PIN
M52525/8-4-4
SAE J516 4-4 F241553
M52525/8-4-5
SAE J516 4-5 F241553
M52525/8-6-6
SAE J516 6-6 F241553
M52525/8-8-8
SAE J516 8-8 F241553
M52525/8-8-10
SAE J516 8-10 F241553
M52525/8-12-12
SAE J516 12-12 F241553
M52525/8-16-16
SAE J516 16-16 F241553
1/ Material and finish designators are omitted from
PIN's, see table I and SAE-J846.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-52525, this document references the following:
MIL-A-8625
ASTM B633
SAE-AMS2700
MIL-DTL-16232
ASTM B695
SAE-AS4841
MIL-DTL-52471
ASTM F1136
SAE-J516
MIL-DTL-52471/1
SAE-AMS-C-81562
SAE-J517
MIL-DTL-52471/4
SAE-AMS-QQ-P-416
SAE-J846
MIL-DTL-81706
SAE-AMS2417
ASME B1.1
SAE-AMS2488
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - AT
DLA - CC
Navy - SH
Air Force - 99
(Project 4730-2007-076)
DLA - CC
Review activities:
Army - CR4
Navy - AS, CG, MC, SA, YD
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using
the ASSIST Online database at https://assist.daps.dla.mil.
6