MIL-DTL-52525/8C
REQUIREMENTS:
Fittings shall be as specified on figure 1 and in tables I, II, and III.
The fittings described herein are for use with hose in accordance with MIL-DTL-52471/4, SAE-J517,
type 100R1 steel wire reinforced, rubber covered hydraulic hose and hose assemblies in accordance
with MIL-DTL-52471/1.
If fittings are to be used on an oxygen hose, see MIL-DTL-52525.
Materials and finishes shall be in accordance with MIL-DTL-52525 and in table I. All finishes shall be
capable of withstanding 96 hours minimum of salt spray.
3