MIL-DTL-25427B
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.2.2 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) INTERNATIONAL
SAE-AMS2700
- Passivation of Corrosion Resistant Steels (DoD Adopted)
SAE-AMS4965
- Titanium Alloy, Bars, Wire, Forgings and Rings, 6Al-4V
Solution Heat Treated and Aged (DoD Adopted)
SAE-AMS5047
- Steel, Sheet and Strip, .08-0.13C, Aluminum Killed
(SAE1010) Deep Forming Grade (DoD Adopted)
SAE-AMS5085
- Steel, Strip, and Plate, 0.47-0.55C (SAE1050) Annealed
(DoD Adopted)
SAE-AMS5529
- Steel, Corrosion Resistant, Sheet and Strip 17CR-7.1NI-1.1A1
Solution Heat Treated and Cold Rolled, Precipitation Hardenable
0.0015 to 0.050 Inch (0.038 to 1.27MM) Normal Thickness
(DoD Adopted)
SAE-AMS5643
- Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing and
Rings, 16Cr-4Ni, 0.30Cb-4 Cu, Solution Heat Treated
Precipitation Hardenable (DoD Adopted)
SAE-AMS5659
- Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and
Extrusions 15CR - 4.5NI - 0.30CB - 3.5CU Consumable
Electrode Melted Solution Heat Treated, Precipitation
Hardenable (DoD Adopted)
SAE-AMS5678
- Steel, Corrosion Resistant, Wire, 17Cr-7.1 Ni-1.1 Al,
Cold Drawn, Precipitation Hardenable (DoD Adopted)
SAE-AMS-P-83461 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant,
Improved Performance at 275 °F (135 °C) (DoD Adopted)
SAE-AMS-QQ-A-225/6 -Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled,
Drawn, Or Cold Finished (DoD Adopted)
SAE-AMS-QQ-A-225/9-Aluminum Alloy 7075, Bar, Rod, Wire, and Special
Shapes; Rolled, Drawn or Cold Finished (DoD Adopted)
SAE-AMS-QQ-P-416 - Plating, Cadmium (Electrodeposited) (DoD Adopted)
SAE-AS603
- Hose, Hydraulic, Tubing and Fitting Assemblies, Impulse
Testing of
SAE-AS1339
- Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced
o
3000 psi, 400 F, Lightweight, Hydraulic and Pneumatic
(DoD Adopted)
SAE-AS8775
- Hydraulic System Components, Aircraft and Missiles,
General Specification for (DoD Adopted)
SAE-AS8791
- Hydraulic and Pneumatic Retainers (Back-up Rings),
Polytetrafluoroethylene (PTFE) (Resin) (DoD Adopted)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business