MS9314C
Dash number |
Tube OD (reference) inches (mm) |
Nut |
Cap |
A minimum inches (mm) |
Approx weight lb/100 (kg/100) |
-02 |
.125 (3.18) |
MS9198-02 |
MS9313-02 |
.200 (5.08) |
1.58 (0.7) |
-03 |
.188 (4.78) |
MS9198-03 |
MS9313-03 |
.260 (6.60) |
2.11 (1.0) |
-04 |
.250 (6.35) |
MS9198-04 |
MS9313-04 |
.325 (8.26) |
2.83 (1.3) |
-05 |
.313 (7.95) |
MS9198-05 |
MS9313-05 |
.395 (10.03) |
4.04 (1.8) |
-06 |
.375 (9.53) |
MS9198-06 |
MS9313-06 |
.460 (11.68) |
4.59 (2.1) |
-07 |
.438 (11.13) |
MS9198-07 |
MS9313-07 |
.520 (13.21) |
5.60 (2.5) |
-08 |
.500 (12.70) |
MS9198-08 |
MS9313-08 |
.590 (14.99) |
7.95 (3.6) |
-09 |
.562 (14.27) |
MS9198-09 |
MS9313-09 |
.655 (16.64) |
9.13 (4.1) |
-10 |
.625 (15.88) |
MS9198-10 |
MS9313-10 |
.720 (18.29) |
10.67 (4.8) |
-11 |
.688 (17.48) |
MS9198-11 |
MS9313-11 |
.790 (20.07) |
13.53 (6.1) |
-12 |
.750 (19.05) |
MS9198-12 |
MS9313-12 |
.855 (21.72) |
16.30 (7.4) |
-14 |
.875 (22.23) |
MS9198-14 |
MS9313-14 |
.980 (24.89) |
20.25 (9.2) |
-16 |
1.000 (25.40) |
MS9198-16 |
MS9313-16 |
1.110 (28.19) |
23.56 (10.7) |
-18 |
1.125 (28.58) |
MS9198-18 |
MS9313-18 |
1.235 (31.37) |
33.74 (15.3) |
-20 |
1.250 (31.75) |
MS9198-20 |
MS9313-20 |
1.365 (34.67) |
37.02 (16.8) |
-24 |
1.500 (38.10) |
MS9198-24 |
MS9313-24 |
1.635 (41.53) |
51.51 (23.4) |
-28 |
1.750 (44.45) |
MS9198-28 |
MS9313-28 |
1.910 (48.51) |
76.61 (34.7) |
-32 |
2.000 (50.80) |
MS9198-32 |
MS9313-32 |
2.185 (55.50) |
91.65 (41.6) |
-40 |
2.500 (63.50) |
MS9198-40 |
MS9313-40 |
2.685 (68.20) |
118.37 (53.7) |
-48 |
3.000 (76.20) |
MS9198-48 |
MS9313-48 |
3.200 (81.28) |
153.98 (69.8) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Assembly shall be free of all burrs and slivers.
4. Do not support cap on seat during staking or marking of PIN.
5. Caps shall be free from defects (cracks, etc.) as a result of staking.
6. Nut shall spin freely on cap after staking.
7. Minimum push-out force 10 pounds (4.5 kg).
8. For design features purposes, this standard takes precedence over documents referenced herein.
FIGURE 1. Cap assembly, tube - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business