MS9195B
Dash number |
z inches (mm) ±.010 (0.25) |
Approx weight lbs/ea (grams/ea) |
-02 |
1.032 (26.21) |
.024 (11) |
-03 |
1.032 (26.21) |
.033 (15) |
-04 |
1.122 (28.50) |
.047 (21) |
-05 |
1.122 (28.50) |
.059 (27) |
-06 |
1.250 (31.75) |
.074 (34) |
-07 |
1.250 (31.75) |
.085 (39) |
-08 |
1.406 (35.71) |
.163 (74) |
-09 |
1.406 (35.71) |
.187 (85) |
-10 |
1.625 (41.28) |
.238 (108) |
-11 |
1.859 (47.22) |
.356 (161) |
-12 |
1.859 (47.22) |
.385 (175) |
-14 |
1.859 (47.22) |
.467 (212) |
-16 |
1.859 (47.22) |
.549 (208) |
-18 |
1.921 (48.79) |
.778 (353) |
-20 |
1.921 (48.79) |
.871 (395) |
-24 |
1.921 (48.79) |
1.115 (506) |
-28 |
2.188 (55.58) |
1.912 (867) |
-32 |
2.422 (61.52) |
2.497 (1133) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances for linear dimensions are ±.015 inch (0.38 mm) and angular dimensions are ±5°, all dimensions concentric within .010 inch (0.25 mm) FIM.
4. Unless otherwise specified machined surfaces to be 125µ inches (3.18µm) in accordance with
ASME B46.1.
5. Diameter F shall be free of thread marks.
6. Diameter F shall be concentric with PD of thread within .0025 inch (0.064 mm) FIM.
7. Lettering height:
a. For -02 through -04 size: 020 - .040 inch (0.51 - 1.02 mm). b. For -05 through -16 size: .040 - .060 inch (1.02 - 1.52 mm). c. For -18 and larger: 090 - .150 inch (2.29 - 3.81 mm).
8. All diameters shall be concentric within .010 inch (0.25 mm) FIM unless otherwise specified.
9. Parting line mismatch .015 inch (0.38 mm) max.
10. E minimum wall thickness between forged surface and hole A.
11. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm).
12. Dimensions are to sharp corners unless otherwise specified.
13. Threads shall be in accordance with FED-STD-H28/2.
FIGURE 1. Elbow, tube, boss, 45° - Continued.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business