MS9193A
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances for linear dimensions are ±.010 inch (0.25 mm) and angular dimensions are ±5°, all dimensions concentric within .010 inch (0.25 mm) FIM.
4. Unless otherwise specified surfaces to be 125µ inches (3.18µm) in accordance with AMSE 846.1.
5. Diameter F shall be free of thread marks.
6. Diameter F shall be concentric with PD of thread within .0025 inch (1.134 mm) FIM.
7. Lettering height:
a. For size -02 through -04: .020 - .040 inch (0.51 - 1.02 mm). b. For size -05 through -16: .040 - .060 inch (1.02 - 1.52 mm).
c. For size -18 and larger: .090 - .150 inch (2.29 - 3.81 mm)
8. All diameters shall be concentric within .010 inch (0.25 mm) FIM unless otherwise specified.
9. Parting line mismatch .015 inch (0.38 mm) max.
10. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm).
11. Threads shall be in accordance with FED-STD-H28/2.
FIGURE 1. Nipple, tube, boss - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5639. Max operating temperature: Oxidation resistance up to 1500°F (816°C).
Max operating pressure: 1500 psi (10 MPa).
Finish: Passivate in accordance with SAE-AMS2700, method 1. PIN:
MS9193 -08
Nipple size (see figure 1)
Specification sheet number
PIN Example:
MS9193-08 identifies a nipple .500 inch (tube), CRES. Do not use unassigned PIN's.
The approximate weight for each fitting is shown in table I.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business