MS9095B
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified machined tolerances linear dimensions ±.010 inch (0.25 mm) angular dimensions ±5°.
4. Surface texture unless otherwise specified shall be 125µ inches (3.17µm) except hex, as specified in
ASME B46.1.
5. Diameter F shall be free of thread marks.
6. Diameter F shall be concentric with pitch diameter of thread within .0025 inch (0.064 mm) FIM.
7. Lettering height:
a. For sizes -08 through -16: 040 - .060 inch (1.02 - 1.52 mm). b. For sizes -18 and larger: .090 - .150 inch (2.29 - 3.81 mm).
8. All diameters shall be concentric within .010 inch (0.25 mm) FIM unless otherwise specified.
9. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm).
10. Threads shall be in accordance with FED-STD-H28/2.
FIGURE 1. Nipple, tube, boss - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1. Max pressure: 1500 psi (10 MPa).
Operating temperature: -40°F to 200°F (-40°C to 93°C). Material: Aluminum as specified in table I.
TABLE I. Materials.
Material |
Form |
Designator |
Specification |
Alloy |
|
Aluminum alloy |
Bar |
Blank |
SAE-AMS4121 |
AMS4121 |
W1 |
SAE-AMS-QQ-A-225/9 |
7075-T73 |
||
W2 |
SAE-AMS4124 or SAE-AMS-QQ-A-225/9 |
7075-T7351 |
||
|
Forgings |
W3 |
SAE-AMS4127 |
6061-T6 |
|
W4 |
SAE-AMS-A-22771 |
7075-T6, T62, or T651 |
||
W5 |
SAE-AMS-A-22771, SAE-AMS-QQ-A-367, or SAE-AMS4141 |
7075-T73 |
||
W6 |
Finish: Anodize treatment in accordance with SAE-AMS2470 for SAE-AMS4121 and for W alloys anodizing shall be in accordance with MIL-A-8625, type II, class 2.
All parts shall be fluorescent penetrant inspected in accordance with ASTM E1417.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business