MS51527D
TA8LE I. Fitting dimensions.
Part number |
Tube O.D. nom |
8 Straight Thread |
D Diameter |
G1 +.002 -.003 |
I3 +/-.020 |
J2 Full Thread +/-.005 |
M +/-.030 |
M4 +/-.030 |
||
8ody |
Assy |
8asic |
Tolerance |
|||||||
82 83 84 85 |
A2 A3 A4 A5 |
1/8 3/16 1/4 5/16 |
.3125-24 UNF-2A .3750-24 UNF-2A .4375-20 UNF-2A .5000-20 UNF-2A |
.062 .125 .172 .234 |
+/-.003 |
.250 .313 .364 .427 |
.610 .610 .700 .700 |
.234 .234 .281 .281 |
.770 .830 .890 .950 |
.910 .940 1.030 1.090 |
86 88 810 812 |
A6 A8 A10 A12 |
3/8 1/2 5/8 3/4 |
.5625-18 UNF-2A .7500-16 UNF-2A .8750-14 UNF-2A 1.0675-12 UN-2A |
.297 .391 .484 .609 |
+/-.004 |
.482 .660 .773 .945 |
.770 .880 1.020 1.160 |
.312 .344 .391 .469 |
1.060 1.250 1.450 1.660 |
1.250 1.450 1.700 1.940 |
+/-.005 |
||||||||||
814 816 820 824 832 |
A14 A16 A20 A24 A32 |
7/8 1 1 1/4 1 1/2 2 |
1.1875-12 UN-2A 1.3125-12 UN-2A 1.6250-12 UN-2A 1.8750-12 UN-2A 2.5000-12 UN-2A |
.718 .844 1.078 1.312 1.781 |
1.070 1.195 1.507 1.756 2.381 |
1.160 1.160 1.160 1.160 1.160 |
.469 .469 .469 .469 .469 |
1.730 1.810 2.060 2.330 3.060 |
2.000 2.050 2.250 2.390 2.890 |
|
+.007/-.005 |
||||||||||
+.008/-.005 |
||||||||||
+.010/-.005 |
||||||||||
REQUIREMENTS:
1. Material: Steel, carbon in accordance with procurement specification. Steel, corrosion-resisting in accordance with procurement specification. Monel in accordance with Federal Specification QQ-N-281. Copper-nickel in accordance with Military Specification MIL-C-15726, composition 70-30.
2. Protective coating: Cadmium plated in accordance with procurement specification. Zinc plated in accordance with procurement specification. Phosphate coated in accordance with procurement specification. (A phosphate coated locknut with cadmium or zinc plated body is acceptable.). Passivation treatment in accordance with procurement specification.
NOTES:
1. Dimensions and tolerances: Dimensions and tolerances not shown shall be in accordance with the
SAE standards for 37-degree flared fittings (SAE J514).
2. Threads: Threads shall be in accordance with Screw-Thread Standards for Federal services. FED-STD-H28.
3. Part number: The MS part number consists of the MS number, plus the dash number.
a. For body only, cadmium plated, use the MS number, plus the body dash number. Example: MS5152782.
b. For complete assembly (with nut and sleeve), cadmium plated, use the MS number, plus the assembly dash number. Example: MS51527A2.
c. For zinc coating add (Z) to the dash number. Example: MS5152782Z or MS51527A2Z. d. For phosphate coating add (P) to the dash number. Example: MS5152782P or
MS51527A2P.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business