MS39207G
Dash number. |
Tube O.D. |
B |
C Thread Length (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
L (mm) |
M (mm) |
1 |
1/8 |
5/16- 24UNF-2A |
9/32 (7.14) |
3/32 (2.38) |
.135 (3.43) .139 (3.53) |
13/64 (5.16) |
1/8 (3.18) |
21/32 (16.67) |
31/32 (34.61) |
2 |
3/16 |
3/8- 24UNF-2A |
9/32 (7.14) |
1/8 (3.18) |
.196 (4.98) .200 (5.08) |
1/4 (6.35) |
5/32 (3.97) |
21/32 (16.67) |
31/32 (34.61) |
3 |
1/4 |
1/2- 20UNF-2A |
25/64 (3.92) |
13/64 (5.16) |
.261 (6.63) .265 (6.73) |
19/64 (7.54) |
13/64 (5.16) |
3/4 (19.05) |
1 5/32 (39.37) |
4 |
5/16 |
9/16- 18UNF-2A |
25/64 (3.92) |
13/64 (5.16) |
.324 (8.23) .328 (8.33) |
19/64 (7.54) |
13/64 (5.16) |
13/16 (20.64) |
1 3/16 (30.16) |
5 |
3/8 |
5/8- 18UNF-2A |
7/16 (11.11) |
9/32 (7.14) |
.386 (9.80) .390 (9.91) |
19/64 (7.54) |
13/64 (5.16) |
15/16 (23.81) |
1 3/8 (34.93) |
6 |
1/2 |
3/4- 16UNF-2A |
7/16 (11.11) |
27/64 (10.71) |
.514 (13.06) .518 (13.16) |
5/16 (7.94) |
13/64 (5.16) |
1 1/8 (28.58) |
1 21/32 (42.07) |
7 |
5/8 |
15/16- 16UN-2A |
15/32 (11.91) |
1/2 (12.70) |
.641 (16.28) .645 (16.38) |
11/32 (8.73) |
15/64 (5.95) |
1 5/16 (33.34) |
1 27/32 (46.83) |
8 |
3/4 |
1 1/16- 16UN-2A |
15/32 (11.91) |
21/32 (16.67) |
.766 (19.46) .770 (19.56) |
11/32 (8.73) |
13/64 (5.16) |
1 1/2 (38.10) |
2 3/32 (53.18) |
9 |
7/8 |
1 3/16- 16UN-2A |
15/32 (11.91) |
23/32 (18.26) |
.891 (22.63) .895 (22.73) |
11/32 (8.73) |
13/64 (5.16) |
1 3/4 (44.45) |
2 11/32 (59.53) |
10 |
1 |
1 5/16- 16UN-2A |
5/32 (3.97) |
7/8 (22.23) |
1.016 (25.81) 1.020 (25.91) |
13/32 (10.32) |
13/64 (5.16) |
1 3/4 (44.45) |
2 11/32 (59.53) |
11 |
1 1/4 |
1 5/8- 16UN-2A |
35/64 (13.89) |
1 3/32 (3.38) |
1.270 (32.26) 1.274 (32.36) |
13/32 (10.32) |
13/64 (5.16) |
2 1/4 (57.15) |
2 7/8 (73.03) |
12 |
1 1/2 |
1 7/8- 16UN-2A |
9/16 (14.29) |
1 11/32 (9.73) |
1.520 (38.61) 1.524 (38.71) |
15/32 (11.91) |
13/64 (5.16) |
2 3/8 (60.33) |
3 1/16 (77.79) |
NOTES:
1. Unless otherwise specified, dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, the tolerance for 3 place decimals is ± .005, the tolerance for fractions is ± 1/64, the tolerance for degrees is ± 2°.
4. Threads shall be in accordance with FED-STD-H28/2.
FIGURE 1. Elbows, tube-safety sleeve compression type, 90 degree - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business