MS39206 Adapters, Straight, Pipe To Tube - Safety Sleeve Compression Type, Male Pipe End

Pages 1 - 2 - 3 - 4 - 5

MS39206G

REQUIREMENTS:

Dimensions and configuration: See figure 1.

Tolerances: Unless otherwise specified, decimals ±.005, fractions ±1/64, degrees ±2°. Threads: The threads shall be in accordance with FED-STD-H28.

Adapters: See table I.

Material:

Code	Material
C	Steel bar, type AISI-C-1112, C-1113, C-1117, C-1118 or C-1137 in accordance with SAE AIR4127.
F	Alloy steel in accordance SAE AIR4127.
S	Corrosion resistant steel in accordance with SAE AMS5659, SAE AMS5862, or, alloy 15-5 PH in accordance with ASTM A564/A564M type XM-12 or UNS S15500 or SAE AMS5665.

Chemical finish:

Code	Finish
C	Carbon steel: Cadmium in accordance with SAE AMS-QQ-P-416, type II, class 3, 200µ inches to 300µ inches (5.08 µm to 7.62 µm) thick.
F	Alloy Steel: Cadmium in accordance with SAE AMS-QQ-P-416, type II, class 3, 200µ inches to 300µ inches (5.08 µm to 7.62 µm) thick.
S	Corrosion resistant steel: Passivate in accordance with SAE AMS2700, type 6 or 7.
Z	Steel, alternative chem finish: ASTM 8633, type VI, FeZn 25.

Part or Identifying Number (PIN) example: (PIN covers the complete item with nuts and sleeves.)

MS 27612 -8 C Z

If finish code same as Material code, then use only one code.

Material code

Dash size

Specification number

MS prefix