MS39201G
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Tolerances: Unless otherwise specified, decimals ±.005, fractions ±1/64, degrees ±2°. Threads: The threads shall be in accordance with FED-STD-H28.
Nipples: See table I.
Material:
Code |
Material |
C |
Steel bar, type AISI-C-1112, C-1113, C-1117, C-1118 or C-1137 in accordance with SAE-AIR4127 |
F |
Alloy Steel bar in accordance with SAE AIR4127, or type 4130 SAE AMS6370 or SAE AMS-S-6758 or type 4140 SAE AMS6349 or SAE AMS6382. |
S |
Corrosion resistant steel in accordance with SAE AMS5659, SAE AMS5862, or, alloy 15-5 PH in accordance with ASTM A564/A564M type XM-12 or UNS S15500, or SAE AMS5665 |
Chemical finish:
Code |
Chemical finish: |
C |
Carbon steel: Cadmium in accordance with SAE AMS-QQ-P-416, type II, class 3, 200µ inches to 300µ inches (5.08 µm to 7.62 µm) thick. |
F |
Alloy steel: Cadmium in accordance with SAE AMS-QQ-P-416, type II, class 3, 200µ inches to 300µ inches (5.08 µm to 7.62 µm) thick. |
S |
Corrosion resistant steel: Passivate in accordance with SAE AMS2700, type 6 or 7. |
Z |
Steel, alternative chem finish: ASTM 8633, type VI, FeZn 25. |
Part or Identifying Number (PIN) example: (PIN covers the complete item with nuts and sleeves.)
MS 27612 -8 C Z
If finish code same as Material code, then use only one code.
Material code
Dash size
Specification number
MS prefix
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business