- NOTES:
1. Dimensions are in inches.
MS39137H
2. Metric equivalents are given for information only.
3. Remove all burrs and slivers.
4. Tolerances unless otherwise specified for three place ±.005 inch (0.13 mm), two place decimals ±.02 inch (0.5 mm), and angles ±2°.
5. NPTF Dryseal Threads shall be in accordance with FED-STD-H28/8 and ANSI-B1.20.3. UNS threads in
accordance with FED-STD-H28/2 and ASME-B1.1.
FIGURE 1. Adapter body - Continued.
Inches |
mm |
0.30 |
7.62 |
0.31 |
7.90 |
0.500 |
12.70 |
MS dash number |
A (NPTF short) |
B inches (mm) |
C inches (mm) |
D inches (mm) |
E inches (mm) |
Material |
-A-1-B |
1/4 |
2.12 (53.85) |
.56 (14.22) |
.53 (13.46) |
.30 (7.62) |
Brass |
-A-1-S |
Steel |
|||||
-A-2-B |
1/2 |
2.31 (58.67) |
.75 (19.05) |
.88 (22.35) |
.49 (12.45) |
Brass |
-A-2-S |
Steel |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Remove all burrs and slivers.
4. Tolerances unless otherwise specified for three place ±.005 inch (0.13 mm), two place decimals ±.02 inch (0.5 mm), and angles ±2°.
5. NPTF Dryseal Threads shall be in accordance with FED-STD-H28/8 and ANSI-B1.20.3. UNEF threads in
accordance with FED-STD-H28/2 and ASME-B1.1.
FIGURE 2. Alternate design adapter body.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business