MS28781E
Size dash no. |
Hose ID ref |
Tubing OD |
Nut |
A max Inch (mm) |
B max Inch (mm) |
C Diameter max Inch (mm) |
D Inch (mm) |
|
4 |
7/32 |
1/4 |
AN818-4 |
2.750 (69.85) |
.410 (10.41) |
.875 (22.23) |
.375 (9.53) |
±.016 (0.41) |
5 |
9/32 |
5/16 |
AN818-5 |
.473 (12.01) |
.937 (23.80) |
|||
6 |
11/32 |
3/8 |
AN818-6 |
2.875 (73.03) |
.535 (13.59) |
1.160 (29.46) |
||
8 |
7/16 |
1/2 |
AN818-8 |
3.000 (76.20) |
1.375 (34.93) |
.438 (11.13) |
||
10 |
9/16 |
5/8 |
AN818-10 |
3.187 (80.95) |
.675 (17.15) |
1.550 (39.37) |
.515 (13.08) |
±.031 (0.79) |
12 |
11/16 |
3/4 |
AN818-12 |
4.000 (101.60) |
1.285 (32.64) |
1.740 (44.20) |
.562 (14.27) |
|
16 |
7/8 |
1 |
AN818-16 |
4.750 (120.65) |
1.562 (39.67) |
2.000 (50.80) |
.620 (15.75) |
|
Size dash no. |
E min Inch (mm) |
F min Inch (mm) |
G (see note 5) min Inch (mm) |
H Dia. Inch (mm) |
J max Inch (mm) |
K diameter Inch (mm) |
R ±.031 (0.79) Inch (mm) |
X Weight max lbs (kg) |
||
4 |
.188 (4.78) |
.146 (3.71) |
.563 (14.30) |
.649 (16.48) |
.754 (19.15) |
.295 (7.49) |
±.010 (0.25) |
.375 (9.53) |
.005 (0.13) |
.13 (59.0) |
5 |
.177 (4.50) |
.625 (15.88) |
.721 (18.31) |
.879 (22.33) |
.355 (9.02) |
.437 (11.10) |
.15 (68.0) |
|||
6 |
.250 (6.35) |
.271 (6.88) |
.688 (17.48) |
.794 (20.17) |
.958 (24.33) |
.435 (11.05) |
.500 (12.70) |
.17 (77.1) |
||
8 |
.365 (9.27) |
.875 (22.23) |
1.010 (25.65) |
.972 (24.69) |
.570 (14.48) |
.010 (0.25) |
.26 (117.9) |
|||
10 |
.312 (7.92) |
.455 (11.56) |
1.000 (25.40) |
1.155 (29.34) |
1.160 (29.46) |
.680 (17.27) |
.625 (15.88) |
.40 (181.3) |
||
12 |
.375 (9.53) |
.568 (14.43) |
1.250 (31.75) |
1.443 (36.65) |
1.816 (46.13) |
.850 (21.59) |
1.250 (31.75) |
.54 (244.9) |
||
16 |
.778 (19.76) |
1.500 (38.10) |
1.732 (43.99) |
2.066 (52.48) |
1.103 (28.02) |
±.015 (0.38) |
1.500 (38.10) |
.83 (376.5) |
||
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.005 inch (0.13 mm).
4. The fitting identification shall be marked in accordance with MIL-DTL-8789.
5. Hex or flats shall fit standard wrench openings.
6. Threads shall be in accordance with SAE-AS8879.
FIGURE 1. Fitting end, 90° elbow, flared tube dimensions and configuration- Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business