MS28780F
Size dash number |
Hose ID ref |
Tubing OD |
Nut |
A max inch (mm) |
B max inch (mm) |
c max inch (mm) |
D inch (mm) |
|
4 |
7/32 |
1/4 |
AN818-4 |
2.875 (73.03) |
.578 (14.68) |
.875 (22.23) |
.375 (9.53) |
±.016 (0.41) |
5 |
9/32 |
5/16 |
AN818-5 |
2.875 (73.03) |
.656 (16.66) |
.937 (23.80) |
.375 (9.53) |
|
6 |
11/32 |
3/8 |
AN818-6 |
3.000 (76.20) |
.719 (18.26) |
1.160 (29.46) |
.375 (9.53) |
|
8 |
7/16 |
1/2 |
AN818-8 |
3.125 (79.38) |
.734 (18.64) |
1.375 (34.93) |
.438 (11.13) |
|
10 |
9/16 |
5/8 |
AN818-10 |
3.312 (84.12) |
.859 (21.82) |
1.550 (39.37) |
.515 (13.08) |
±.031 (0.79) |
12 |
11/16 |
3/4 |
AN818-12 |
4.000 (101.60) |
1.328 (33.73) |
1.740 (44.20) |
.562 (14.27) |
|
16 |
7/8 |
1 |
AN818-16 |
4.750 (120.65) |
1.500 (38.10) |
2.000 (50.80) |
.620 (15.75) |
|
Size dash number |
E min inch (mm) |
F min inch (mm) |
G 5/ min inch (mm) |
J max inch (mm) |
K inch (mm) |
L ±.031 (0.79) inch (mm) |
x inch (mm) |
Weight max lbs (kg) |
|
4 |
.188 (4.78) |
.146 (3.71) |
.563 (14.30) |
.388 (9.86) |
.295 (7.49) |
±.010 (0.25) |
.375 (9.53) |
.005 (.13) |
.13 (59.0) |
5 |
.177 (4.50) |
.625 (15.88) |
.450 (11.43) |
.355 (9.02) |
.437 (11.10) |
.14 (63.5) |
|||
6 |
.250 (6.35) |
.271 (6.88) |
.688 (17.48) |
.480 (12.19) |
.435 (11.05) |
.500 (12.70) |
.16 (72.6) |
||
8 |
.365 (9.27) |
.875 (22.23) |
.490 (12.45) |
.570 (14.48) |
.010 (.25) |
.25 (113.4) |
|||
10 |
.312 (7.92) |
.455 (11.56) |
1.000 (25.40) |
.562 (14.27) |
.680 (17.27) |
.625 (15.88) |
.38 (172.4) |
||
12 |
.375 (9.53) |
.568 (14.43) |
1.250 (31.75) |
.781 (19.84) |
.850 (21.59) |
1.250 (31.75) |
.51 (231.3) |
||
16 |
.778 (19.76) |
1.500 (38.10) |
.844 (21.44) |
1.103 ±.015 (28.02) (0.38) |
1.500 (38.10) |
.76 (344.7) |
|||
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.005 inch (0.13 mm).
4. The fitting identification shall be marked in accordance with MIL-DTL-8789.
5. Hex or flats shall fit standard wrench openings.
6. Threads shall be in accordance with SAE-AS8879.
FIGURE 1. Fitting end, 45° elbow, flared tube dimensions and configuration- continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business