MS28754E
PIN. The PIN shall consist of the prefix MS followed by the specification sheet number, letter for material designator, and a number for the size.
MS28754 W 16
Size designator (see figure 1)
Material (see table I)
Specification sheet number
MS prefix
Example of PIN: MS28754W16 indicates a swivel with 45° flange, aluminum, 1 inch hose or tubing size.
Fittings shall be permanently marked with the applicable MS PIN on an unfinished surface of the nipple.
Approximate weights are shown in table II.
TABLE II. Approximate weight.
Size |
Weight lb (Approx) |
|
Aluminum |
Titanium |
|
16 |
.735 (333.4) |
1.21 (548.8) |
20 |
.830 (376.5 |
1.37 (621.4) |
24 |
.840 (381.0) |
1.39 (630.5) |
32 |
1.064 (482.6) |
1.76 (798.3) |
40 |
1.300 (589.7) |
2.15 (975.2) |
48 |
1.650 (748.4) |
2.73 (1238.3 |
Intended use: Hose assemblies using hose in accordance with MIL-PRF-7061.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. This document references the following:
FED-STD-595/36076
FED-STD-595/36081
FED-STD-595/36099
FED-STD-595/36118
FED-STD-595/36134
FED-STD-595/36152
FED-STD-595/36170
FED-STD-595/36173
FED-STD-595/36176
MIL-A-8625
MIL-PRF-7061
MS20756
ASME-B46.1
SAE-AMS2486
SAE-AMS2488
SAE-AS4841
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business