MS27638E
PIN |
A ±.02 inches (cm) |
B ±.02 inches (mm) |
C ±.005 inches (mm) |
D ±.005 inches (mm) |
E |
|
min inches (mm) |
max inches (mm) |
|||||
MS27638-4C |
3.37 (8.56) |
1.12 (28.45) |
.325 (8.26) |
.475 (12.07) |
.225 (5.72) |
.230 (5.84) |
MS27638-6C |
3.75 (9.53) |
1.50 (38.10) |
.300 (7.62) |
.605 (15.37) |
.322 (8.18) |
.334 (8.48) |
MS27638-8C |
4.25 (10.80) |
2.00 (50.80) |
.355 (9.02) |
.705 (17.91) |
.440 (11.18) |
.445 (11.30) |
MS27638-10C |
4.25 (10.80) |
2.00 (50.80) |
.295 (7.49) |
.870 (22.10) |
.575 (14.61) |
.580 (14.73) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances shall be ±.005 inch (0.13 mm).
4. Surface roughness, in accordance with ASME B46.1, shall not exceed 125 µin Ra, unless otherwise specified.
5. For hex, use commercial stock size tolerance in accordance with SAE-AMS2241.
6. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
7. Unless otherwise specified, radius or break all corners to .005 +.005/-.000 inch (0.13 +0.13/-0.00 mm).
8. All burrs and slivers shall be removed.
FIGURE 1. Mandrel sleeve setting dimensions and configuration - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part for use with hose assemblies in accordance with MIL-DTL-32330.
Material: Material shall be tool steel alloy UNS T41902, type 2 in accordance with ASTM A681. Hardness: Hardness shall be Rockwell C 58 to 60.
Finish: Finish shall be black oxide in accordance with SAE-AMS2485.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business