MS27635C
|
PIN |
W ±.005 (0.13) inch (mm) |
AA ± .005 (0.13) inch (mm) |
AB inch (mm) |
AC ±.005 (0.13) inch (mm) |
|
MS27635-4C |
.825 (20.96) |
.069 (1.75) |
.625 (15.88) |
+.000 -.009 (-0.23) |
.138 (3.51) |
MS27635-6C |
.962 (24.43) |
.092 (2.34) |
.750 (19.05) |
.185 (4.70) |
|
MS27635-8C |
1.100 (27.94) |
.095 (2.41) |
.875 (22.23) |
+.000 -.007 (-0.18) |
.190 (4.83) |
MS27635-10C |
1.375 (34.93) |
.125 (3.18) |
1.062 (26.97) |
+.000 -.008 (-0.20 |
.250 (6.35) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances shall be ±.005 inch (0.13 mm).
4. Unless otherwise specified, radius or break all corners to .005 + .005/-.000 inch (0.13 +0.13/-0.00 mm).
5. Unless otherwise specified, surface roughness, in accordance with ASME B46.1, shall not exceed
125 µin Ra.
6. In area X, a dry-film lubricant shall be used as specified in MIL-PRF-46010 or SAE-AS5272. Dry-
film lubricant shall be allowed in area Y. Dry-film lubricant shall not extend beyond area Z.
7. For dimension C, use commercial stock size tolerance as specified in SAE-AMS2241.
8. All burrs and slivers shall be removed.
9. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
FIGURE 1. Flareless nipple dimensions and configuration - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This is a design specification sheet for manufacturing purposes. The item is only procured as an integral part of adapter assembly MS27632.
This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with
MIL-DTL-32330.
Material: Material shall be a corrosion resistant steel (CRES), class 304, condition B, in accordance with ASTM A276. Sizes -4, -6, and -8 shall have a minimum yield of 70,000 psi and size -10 shall have a minimum yield of 60,000 psi.
Finish: Finish shall be passivated in accordance with MIL-DTL-83296.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business