MS27632B
PIN |
Nipple |
A ±.015 (0.38 mm) inch (cm) |
MS27632-4C |
MS27635-4C |
.962 (2.44) |
MS27632-6C |
MS27635-6C |
1.109 (2.82) |
MS27632-8C |
MS27635-8C |
1.257 (3.19) |
MS27632-10C |
MS27635-10C |
1.348 (3.42) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
FIGURE 1. Straight, flareless, nipple sub assembly - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with
MIL-DTL-32330.
Material: Material shall be corrosion resistant steel (CRES).
Finish: Finish shall be passivated in accordance with MIL-DTL-83296. PIN example:
MS27632 -4 C
Material (C for CRES)
Dash size (see figure 1)
Specification sheet number
MS prefix
PIN example: MS27632-4C indicates a nipple sub-assembly straight 1/4 inch, CRES.
Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business