MS27630B
PIN |
Elbow sub assembly |
Sleeve |
Socket |
A max inch (cm) |
MS27630-4C |
MS27633-4C |
MS27623-4C |
MS27622-4C |
2.33 (5.92) |
MS27630-6C |
MS27633-6C |
MS27623-6C |
MS27622-6C |
2.66 (6.76) |
MS27630-8C |
MS27633-8C |
MS27623-8C |
MS27622-8C |
3.16 (8.03) |
MS27630-10C |
MS27633-10C |
MS27623-10C |
MS27622-10C |
2.91 (7.39) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
FIGURE 1. Adapter assembly, flareless, 45o elbow- Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with
MIL-DTL-32330.
Sizes -4 thru -8 shall have a forged design. Size -10 shall have a bent tube design. Material: Material shall be corrosion resistant steel (CRES), class 304 in accordance with
SAE-AMS5639, 304L in accordance with SAE-AMS5647, 316 in accordance with SAE-AMS5648, or
321 in accordance with SAE-AMS5645, or condition A (accepted classes only), in accordance with
ASTM A276.
Finish: Finish shall be passivated in accordance with MIL-DTL-83296. PIN example:
MS27630 -4 C
Material (C for CRES)
Dash size (see figure 1)
Specification sheet number
MS prefix
PIN example: MS27630-4C indicates a 45° adapter assembly 1/4 inch, CRES.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business