MS27624B
PIN |
AB ±5° |
AC inch (mm) ±.010 (0.25) |
AD |
AE ±5° |
AF inch (mm) |
||
MS27624-4C |
20° |
.020 (0.51) |
.086 (2.18) |
±.002 (0.51) |
45° |
.625 (15.88) |
+.000 -.009 (+.000 -0.23) |
MS27624-6C |
.100 (2.54) |
.750 (19.05) |
|||||
MS27624-8C |
15° |
30° |
.875 (22.23) |
+.000 -.007 (+.000 -0.18) |
|||
MS27624-10C |
.128 (3.25) |
+.005 -.000 |
45° |
1.062 (26.97) |
+.000 -.008 (+.000 -0.20) |
||
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances for three place decimals are ±.005 inch (0.13 mm).
4. Radius or break all corners to .005 +.005/-.000 (0.13 +0.13/-0.00 mm), unless otherwise specified
5. For dimension U, use commercial stock size tolerance as specified in SAE-AMS2241.
6. In area X, a dry-film lubricant shall be used as specified in MIL-PRF-46010 or SAE-AS5272. Dry film lubricant is allowed in area Y. In area Z, dry-film lubricant shall not be allowed.
7. Break all sharp edges and remove all hanging burrs and slivers.
8. Surface roughness, as specified in ASME B46.1, shall not exceed 125 µin Ra.
9. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
FIGURE 1. Nipple union dimensions and configuration - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and on figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This is a design specification sheet for manufacturing purposes. The item is only procured as an integral part of an adapter assembly.
This component is used on adapter assemblies MS27620, MS27621, MS27633, and MS27634. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with
MIL-DTL-32330.
Material: Material shall be corrosion resistant steel (CRES), class 304, condition B, as specified in ASTM A276 or ASTM A473, with minimum yield of 70,000 psi (483 MPa) for sizes -4C, -6C, and -8C and a minimum yield of 80,000 psi (552 MPa) for size -10C.
Finish: Finish shall be passivated as specified in MIL-DTL-83296.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business