MS27621B
PIN |
Union |
Wire |
Nipple |
A inches (cm) |
B inches (cm) |
MS27621-4C |
MS27624-4C |
MS27625-4C |
MS27627-4C |
.970 (2.46) |
.705 (1.79) |
MS27621-6C |
MS27624-6C |
MS27625-6C |
MS27627-6C |
1.088 (2.76) |
.836 (2.12) |
MS27621-8C |
MS27624-8C |
MS27625-8C |
MS27627-8C |
1.304 (3.31) |
.980 (2.48) |
MS27621-10C |
MS27624-10C |
MS27625-10C |
MS27627-10C |
1.434 (3.64) |
1.176 (2.98) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Dimensioning and tolerancing are in accordance with ASME Y14.5M.
4. Any design of adapter component to the left of plane A-A is acceptable provided that dimension A, provided the requirements specified herein and the requirements of MIL-DTL-83296 are met.
5. Part or Identifying Number (PIN).
FIGURE 1. Elbow, 90°, flared, sub assembly- Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern.
This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with
MIL-DTL-32330.
Material: Material shall be corrosion resistant steel (CRES).
Sizes -4 thru -8 shall have a forged design (tolerance ±.020 inch (0.51 mm)). Size -10 shall have a bent tube design (tolerance ±.035 inch (0.89 mm)).
Finish: Finish shall be passivated as specified in MIL-DTL-83296. PIN example:
MS27621 -4 C
Material (C for CRES) Dash size (see figure 1)
Specification sheet number
MS prefix
PIN example: MS27621-4C indicates a 90° elbow sub-assembly 1/4 inch, CRES.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business