MS27382C
REQUIREMENTS
Adapter assembly illustration, see figure 1.
Intended use. This adapter is intended for use with hose in accordance with MIL-DTL-27267. Flareless fitting, hose connector design. Use MIL-DTL-25579/1 for application of NAS1760 design. Materials. Material and material codes see table I. See applicable specification sheet and
MIL-DTL-27272 for material of other components identified in table II for their material requirements.
TABLE I. Materials and PIN codes.
Material code |
Material |
Blank |
Combination of aluminum alloy and corrosion-resistant steel (CRES) |
C |
CRES |
TABLE II. Adapter assembly composition. 1/ 2/
Size and material code |
Elbow subassembly size and material code |
Sleeve size and material code |
Socket size and material code |
A max inch (mm) |
MS27387 3/ |
MS27070 3/ |
MS27069 3/ |
||
-10C |
-10C |
-10C |
-10C |
2.62 (66.5) |
-10 |
-10 |
|||
-12C |
-12C |
-12C |
-12C |
3.07 (78.0) |
-12 |
-12 |
|||
-16C |
-16C |
-16C |
-16C |
3.21 (81.5) |
-16 |
-16 |
|||
-20C |
-20C |
-20C |
-20C |
3.72 (94.5) |
-20 |
-20 |
|||
-24C |
-24C |
-24C |
-24C |
4.12 (104.6) |
-24 |
-24 |
1/ Dimensions are in inches.
2/ Metric equivalents are given for general information only.
3/ MS27069, MS27070 and MS27387 shall be dry film lubricated in accordance with table
III, dry film is applied in accordance with MS27069, MS27070 or MS27387 as applicable.
If required, lockwire holes to be drilled in accordance with SAE-AS1043 and suffix L added to the Part or Identifying Number (PIN).
MS27069, MS27070 and MS27387 parts shall be lubricated with dry-film lubricant in accordance with table III and shall be coated with the same type of dry film lubricant as indicated in the MS27382 PIN. No mixing of dry film lubricants shall be used on an assembly unless it is of the types specified by the "blank" designator.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business