MS27235D
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS27225 and MS27229. As part of an assembly this part is used on MS27226 and MS27230 hose to tube adapters. This item shall not be procured for stocking purposes.
Materials: Materials shall be in accordance with MIL-DTL-5070.
Finish: Finish shall be in accordance with MIL-DTL-5070. Platings are applied after heat treats. Color identification: Color identification shall be in accordance with MIL-DTL-5070.
Part or Identifying Number (PIN) example:
MS 27235 -4 CZ
Material/finish code, see table I Dash number on figure 1
Specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
CC |
-4 through -6 |
Carbon Steel - cadmium plating |
CZ |
-4 through -6 |
Carbon steel - zinc plating |
SS |
-4 through -6 |
Corrosion resistant steel - N/A |
AA |
-8 through -48 |
Aluminum - anodic coating |
TA |
-4 through -48 |
Titanium - anodized or fluoride phosphated. |
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents: In addition to MIL-DTL-5070, this document references the following: MS27225
MS27226
MS27229
MS27230
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business