MS27229B
Dash number |
A ±.035 inches (mm) |
B ±.035 inches (mm) |
C Elbow PIN |
D Nipple PIN |
E Shoulder PIN |
F (ref) inches (mm) |
MS27235 |
MS27239 |
MS27237 |
||||
-8 |
.921 (23.39) |
.338 (8.59) |
-8 |
-8 |
-8 |
.50 (12.70) |
-10 |
1.009 (25.63) |
.375 (9.53) |
-10 |
-10 |
-10 |
.62 (15.75) |
-12 |
1.194 (30.33) |
.468 (11.89) |
-12 |
-12 |
-12 |
.84 (21.34) |
-16 |
1.282 (32.56) |
.505 (12.83) |
-16 |
-16 |
-16 |
.97 (24.64) |
-20 |
1.561 (39.65) |
.569 (14.45) |
-20 |
-20 |
-20 |
1.19 (30.23) |
-24 |
1.756 (44.60) |
.624 (15.85) |
-24 |
-24 |
-24 |
1.38 (35.05) |
-32 |
2.084 (52.93) |
.734 (18.64) |
-32 |
-32 |
-32 |
1.75 (44.45) |
-40 |
2.430 (61.72) |
.825 (20.96) |
-40 |
-40 |
-40 |
2.06 (52.32) |
-48 |
2.732 (69.39) |
.898 (22.81) |
-48 |
-48 |
-48 |
2.31 (58.67) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Part or Identifying Number (PIN).
FIGURE 1. 45° flange nipple assembly dimensions and configuration- Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS27230.
Material: Aluminum shall be in accordance with MIL-DTL-5070.
Braze: Braze along joint J (see figure 1) in accordance with SAE-AMS2672.
Heat treatment: Heat treat in accordance with SAE-AMS-H-6088, condition T6, after braze. Finish: Finish in accordance with MIL-DTL-5070
Color identification: Color identification shall be in accordance with MIL-DTL-5070.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business