MS27227B
Dash number (see note 3) |
A ±.035 (0.89) inches (mm) |
B ±.035 (0.89) inches (mm) |
C Elbow PIN MS27234 |
D Nipple PIN MS27239 |
E Shoulder PIN MS27237 |
G Rad (ref) inches (mm) |
-8 |
.876 (22.25) |
.772 (19.61) |
-8 |
-8 |
-8 |
.50 (12.70) |
-10 |
1.000 (25.40) |
.896 (22.76) |
-10 |
-10 |
-10 |
.62 (15.75) |
-12 |
1.220 (30.99) |
1.156 (29.36) |
-12 |
-12 |
-12 |
.84 (21.34) |
-16 |
1.344 (34.14) |
1.282 (32.56) |
-16 |
-16 |
-16 |
.97 (24.64) |
-20 |
1.688 (42.88) |
1.500 (38.10) |
-20 |
-20 |
-20 |
1.19 (30.23) |
-24 |
1.938 (49.23) |
1.688 (42.88) |
-24 |
-24 |
-24 |
1.38 (35.05) |
-32 |
2.376 (60.35) |
2.062 (52.37) |
-32 |
-32 |
-32 |
1.75 (44.45) |
-40 |
2.812 (71.42) |
2.374 (60.30) |
-40 |
-40 |
-40 |
2.06 (52.32) |
-48 |
3.188 (80.98) |
2.624 (66.65) |
-48 |
-48 |
-48 |
2.31 (58.67) |
NOTES:
1. Dimensions are in inches
2. Metric equivalents are given for information only.
3. All components of this assembly shall be aluminum alloys only.
4. Part or Identifying Number (PIN).
FIGURE 1. 90° Flange nipple assembly dimensions and configuration- Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS27228.
Material: Aluminum shall be in accordance with MIL-DTL-5070.
Braze: Braze at points J (see figure 1) in accordance with SAE-AMS2672.
Heat treatment: Heat treat in accordance with SAE-AMS-H-6088, condition T6, after braze. Finish: Finish shall be in accordance with MIL-DTL-5070.
Color identification: Color identification shall be in accordance with MIL-DTL-5070.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business