MS27225C
Dash number |
A ±.035 (0.89) inches (mm) |
B ±.035 (0.89) inches (mm) |
C inches (mm) |
D Wire PIN |
E Shoulder PIN |
F Nut PIN (see note 4) |
G Nipple PIN |
H Elbow PIN |
K Rad (ref) inches (mm) |
MS27238 |
MS27236 |
SAE- AS4370 |
MS27239 |
MS27235 |
|||||
-4 |
.758 (19.25) |
.352 (8.94) |
.37 (9.40) |
-4 |
-4 |
-4 |
-4 |
-4 |
.38 (9.65) |
-5 |
.909 (23.09) |
.415 (10.54) |
.38 (9.65) |
-5 |
-5 |
-5 |
-5 |
-5 |
.44 (11.18) |
-6 |
.965 (24.51) |
.444 (11.28) |
.38 (9.65) |
-6 |
-6 |
-6 |
-6 |
-6 |
.50 (12.70) |
-8 |
1.039 (26.39) |
.456 (11.58) |
.44 (11.18) |
-8 |
-8 |
-8 |
-8 |
-8 |
|
-10 |
1.171 (29.74) |
.536 (13.61) |
.50 (12.70) |
-10 |
-10 |
-10 |
-10 |
-10 |
.62 (15.75) |
-12 |
1.348 (34.24) |
.625 (15.88) |
.57 (14.48) |
-12 |
-12 |
-12 |
-12 |
-12 |
.84 (21.34) |
-16 |
1.436 (36.47) |
.660 (16.76) |
.63 (16.00) |
-16 |
-16 |
-16 |
-16 |
-16 |
.97 (24.64) |
-20 |
1.760 (44.70) |
.768 (19.51) |
.64 (16.26) |
-20 |
-20 |
-20 |
-20 |
-20 |
1.19 (30.23) |
-24 |
1.999 (50.77) |
.867 (22.02) |
.77 (19.56) |
-24 |
-24 |
-24 |
-24 |
-24 |
1.38 (35.05) |
-32 |
2.415 (61.34) |
1.066 (27.08) |
.92 (23.37) |
-32 |
-32 |
-32 |
-32 |
-32 |
1.75 (44.45) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are as follows: angles ±1°; decimals ±.005 inches (0.01 mm).
4. Nut shall swivel freely after assembly.
5. Part or Identifying Number (PIN).
FIGURE 1. 45° Nipple assembly dimensions and configuration - Continued. REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use: This part is a component of MS27226.
Materials: Materials shall be in accordance with MIL-DTL-5070.
Finish: Finish shall be in accordance with MIL-DTL-5070. Platings are applied after heat treats and before assembling nut.
Color identification: Color identification shall be in accordance with MIL-DTL-5070.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business