MS27223C
|
Dash number |
A ±.035 (0.89) inches (mm) |
B ±.035 (0.89) inches (mm) |
C inches (mm) |
D Wire MS27238 dash number |
E Shoulder MS27236 dash number |
F Nut SAE- AS4370 dash number |
G Nipple MS27239 dash number |
H Elbow MS27234 dash number |
K Rad (ref) inches (mm) |
-4 |
.626 (15.90) |
.718 (18.24) |
.37 (9.40) |
-4 |
-4 |
-4 |
-4 |
-4 |
.38 (9.65) |
-5 |
.750 (19.05) |
.844 (21.44) |
.38 (9.65) |
-5 |
-5 |
-5 |
-5 |
-5 |
.44 (11.18) |
-6 |
.812 (20.62) |
.922 (23.42) |
-6 |
-6 |
-6 |
-6 |
-6 |
.50 (12.70) |
|
-8 |
.876 (22.25) |
.938 (23.83) |
.44 (11.18) |
-8 |
-8 |
-8 |
-8 |
-8 |
.50 (12.70) |
-10 |
1.000 (25.40) |
1.126 (28.60) |
.50 (12.70) |
-10 |
-10 |
-10 |
-10 |
-10 |
.62 (15.75) |
-12 |
1.220 (30.99) |
1.372 (34.85) |
.57 (14.48) |
-12 |
-12 |
-12 |
-12 |
-12 |
.84 (21.34) |
-16 |
1.344 (34.14) |
1.502 (38.15) |
.63 (16.00) |
-16 |
-16 |
-16 |
-16 |
-16 |
.97 (24.64) |
-20 |
1.688 (42.88) |
1.784 (45.31) |
.64 (16.26) |
-20 |
-20 |
-20 |
-20 |
-20 |
1.19 (30.23) |
-24 |
1.938 (49.23) |
2.036 (51.71) |
.77 (19.56) |
-24 |
-24 |
-24 |
-24 |
-24 |
1.38 (35.05) |
-32 |
2.376 (60.35) |
2.532 (64.31) |
.92 (23.37) |
-32 |
-32 |
-32 |
-32 |
-32 |
1.75 (44.45) |
NOTES:
1. Dimensions are in inches
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are as follows: Angles ±1°; decimals ±.005 inch (0.13 mm).
4. Nut shall swivel freely after assembly.
5. Part or Identifying Number (PIN).
FIGURE 1. Nipple assembly dimensions and configuration - Continued.
REQUIREMENTS.
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use. This part is a component of MS27224.
Materials: Materials shall be in accordance with MIL-DTL-5070.
Finish: Finish shall be in accordance with MIL-DTL-5070. Platings are applied after heat treats and before assembling nut.
Color identification: Color identification shall be in accordance with MIL-DTL-5070.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business