MS27077D
Size and material code |
A (see note 1) |
B C ±.005 ±.015 |
D ±.016 |
E +.010 -.000 |
||
-8C |
1.390 |
±.016 |
.950 |
1.782 |
.219 |
.205 |
-10C |
1.468 |
1.038 |
1.906 |
|||
-12C |
1.594 |
1.156 |
2.094 |
|||
-16C |
1.750 |
1.312 |
2.312 |
|||
-20C |
2.188 |
±.020 |
1.656 |
2.875 |
.266 |
.266 |
-24C |
2.375 |
1.812 |
3.094 |
.281 |
||
Size and material code |
F (see note 2) +.005 -.000 |
G (see note 2) +.010 -.000 |
H ±.5° (see note 6) |
J ±.016 |
K +.005 -.000 |
M (see note 7) +.015 -.005 |
-8C |
.885 |
.750 |
20° |
.297 |
.136 |
.234 |
-10C |
1.010 |
.880 |
||||
-12C |
1.260 |
1.125 |
||||
-16C |
1.510 |
1.375 |
18° |
|||
-20C |
1.854 |
1.688 |
16° |
|||
-24C |
2.135 |
1.938 |
.359 |
.168 |
.297 |
NOTES:
1. Reduction of dimensions by 7° max draft angle permissible if forged.
2. Diameters F and G shall be concentric within .010 inch full indicator movement (FIM).
3. Unless otherwise specified, break or radius all corners .005, +.005, -.000 inch.
4. Surface roughness. Unless otherwise specified, maximum surface roughness shall not exceed
125 µin Ra in accordance with ASME B46.1.
5. Remove all burrs and slivers.
6. H dimension equally applies to all 4 holes.
7. Part may be forged or machined from bar. If machined, thickness shall be to dimension M.
FIGURE 1. Flange illustration - Continued.
REQUIREMENTS
Flange illustration. See figure 1.
Intended use. This part is a component of MS27062, MS27064, and MS27066. This is a design standard for manufacturing purposes. The item is only procured as an integral part of adapter assemblies.
Material. Corrosion-resistant steel (CRES), class 304, condition A, in accordance with
SAE-AMS-QQ-S-763 or 304 CRES in accordance with SAE-AMS5639.
Finish. Passivate in accordance with SAE-AMS2700 method 1, type 6 or 7.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business