MS27070E
PIN: The PIN consists of prefix "MS", the specification sheet number, dash number for sleeve size, letter for material, and a blank or number for dry film lubricate. Unassigned PIN's shall not be used.
MS 27070 - 10 C
Dry film designator (see table I) Material code letter ("C" CRES) Size code number (see figure 1) Dash
Specification sheet number
MS prefix
PIN examples:
MS27070-10C |
indicates a sleeve size 10, CRES with dry film class designator "blank". |
MS27070-10C4 |
indicates a sleeve size 10, CRES with dry film class designator 4. |
Identification of product. The PIN and the manufacturer's trademark shall be permanently marked on the part.
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-27272, this document references the following:
MIL-PRF-46010
MS27053
MS20754
MS20755
MS20756
MS20757
MS20758
MS20759
MS27060
MS27381
MS27382
MS27383
MS27384
MS27385
ASME 846.1
SAE-AMS2700
SAE-AMS5643
SAE-AS1701
SAE-AS5272
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business